Stop It® Flat Patch™

                                                             

                                                                                     *Dual-component dispensing gun sold separately

 

STOP IT® Flat Patch is a leak sealant product designed for applications where localized repair is needed or full pipe wraps are impractical. The carbon fiber composite repair system safely and quickly restores operations up to 1,000 psi, and provides localized corrosion inhibition

 

STOP IT® Flat Patch standard kit sizes: 4”x 4” and 6”x 6” ; custom repair sizes available. Flat Patch applications can be made regardless of surface orientation (i.e., vertical or horizontal) and will result in a durable repair that will not shatter or crack, even under extreme operating conditions.

 

Usage

Usage Tanks • Vessels • Large Diameter Pipes • Valve and Pump Casings • Welded Seams Rail Cars • Roofs • Drums • and More

 

Chemical Resistance

STOP IT® Flat Patch is recommended for pressure sealing applications involving most categories of chemicals and hydrocarbons. Extended chemical resistance data is available upon request. End users are encouraged to verify specific resistances before application.

 

 

Reinforcement Fibers

3K Multifilament Continuous Tow

Tensile Strength: 510-635 KSI

Tensile Modulus: 33.0-34.9 MSI

Elongation: 1.4-1.95%

 

Composite

Pressure Limitation: Recommended for pressures up to 1000 psi (70 kg/cm2 , 69 bar) based on documented laboratory pressure retention tests

Maximum Operating Temperature: 165°F (74°C), when cured and annealed

 

 

Visit www.indumar.com for more information.